What are the precautions that the steam car wash machine manufacturer reminds us?
1. The external equipment of the steam car washing machine is equipped with heat dissipation louver box. When working, do not aim the spray gun at the shell of the machine for washing, and try to prevent water splashing into the interior of the steam car washing machine.
2. Before each cleaning, check the stability of the equipment operation to avoid that the machine is damaged and cannot be cleaned after arriving at the user's home.
3. The electric heating steam cleaner shall be placed in the right direction, and the equipment may be damaged if it is dumped or inverted.
4. When using, drain all the internal water, place it in a dry and ventilated place, and cover it with a cloth.
It can be said that which parts of steam car wash machine are easy to break, in fact, there are several. First of all, the coil, one of which is to ensure the main purpose of the whole heating part. Because the pipe is bent and the inner diameter is only 0.5cm, it will be burned red in the instant of heating. At this time, the cold water is sent into the coil and the pipe is vaporized, and the impurities in the water are separated and attached to the inner wall of the pipe. The longer the time of use, the scale will accumulate. The more. Until the scale completely blocks the coil and the steam car washer cannot continue to operate. Then there is the internal pipeline interface. Sometimes, because of the difference between two layers of tape wrapping at the interface, small leakage is inevitable. Under the urging of large pressure, water will leak more until it is completely gushed out.
The above-mentioned steam car wash machine parts that are easy to be damaged inside are all preventable. Take the coil as an example, it is impossible to prevent the incrustation caused by impurities in the water when it is heated, but it is agreed to solve it by other methods. First, use the pre clean water filter to remove the impurities in the water as far as possible, so as to delay the condensation of incrustation. The second is to enhance the frequency of scale removal. Cleaning the scale once every half a month can prevent the coil from blocking.