The process of car wash with high-pressure water gun car wash machine is relatively simple and rude. First, spray some car wash foam on your car and wipe it with a towel. Then start washing with high-pressure car wash machine. After flushing, it will be finished. There is no way to protect the paint and the engine.
Because the high-pressure water gun car wash machine washes the car before washing the car with soft water, which is very easy to scratch the car paint directly with the high-pressure water gun, because the water pressure is too high, it is easy to cause secondary damage.
On the contrary, if you use a nanotechnology steam car wash machine, it will not cause scratch damage first, and it is a safe protection for the engine.
After washing with a nanotechnology steam car wash machine, it is found that the washing is much cleaner than the high-pressure water gun washing, because the pressure of the steam washing machine is only 8 bar, and more is the manual washing, so there will be a lot of protection for the body and the engine.
And I wiped the car in time with a towel and didn't leave a watermark.
The use of towels must be strictly classified, otherwise it will cause secondary scratches on the paint.
When we wiped the water, we found that there were a lot of scratches on the top of the car, and a few were very obvious. This estimate is caused by the high-pressure water gun car wash machine when washing the car, without the use of water to wash away the sand.
High-pressure water gun car wash machine is cheap, but it is not recommended.
If it is not an emergency, or if you don't care, you should be cautious when washing your car with a high-pressure water gun. Otherwise, you must use a nano technology steam car wash machine.